DSP-SF-300KW Super Audio Induction Heating Machine
Specfication:
1. This equipment adopts the IGBT inverter circuit in parallel connection, which has high load adaptability.
2. It has such feaures as high power, fast heating speed, high efficiency and easy operation.
3. As compared with other heating modes, it can significantly promote the economic benefits, improve the quality of heated work pieces and save the energy and material, alleviate labor intensity and improve the production environment.
4. It has super small size, which can save the production space by 10 times.
5. The machine has insolation transfromer, It is safe and reliable, and requires no equipments of ten thousand voltage, and thus can ensure the safe operation.
6. The comprehensive full load design is available for 24-hour continuous operation.
Induction Heating Machine Application:
1. Heating(forging, hot fiting, and melting)
2. Heat Treatment (surfuce and quench)
3. Welding (braze welding, silver soldering and brazing)
4. Annealing(tempering and modulation)
Paramaters:
| Model | DSP-SF-300KW |
| work power | 380V/ 415V/ 440V/480V *3phase 50HZ-60HZ |
| Input current | 450A |
| fluctuating frequency | 5-25KHZ |
| the flow rate of cooling water | 0.15-0.3Mpa |
| water temperature protection point | 40C |
| product size |
| 800*800*1800MM |
| net weight | 380KGS |
Induction heating Machine advantages:
1. Energy saving, Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type
2. No physical contact and less maintenance.Minimizes the time of heating. Therefore it reduce oxidation and decrease production time.
3. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.
4. Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)
5. There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.
1) Manual, On and stop in the Switch
2) Fixed Timer, setting heating time, after reach the heating time, then stop.
3) Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.
4) Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.
5) Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put the
Paramater that you need to set, if not choose that function then show"--
6. This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.
Product Tags:
|
|
DSP-SF-300KW Super Audio Induction Heating Machine 600A Induction Melting System Images
|
